Tuesday, February 9, 2016

Offline for a major site upgrade

 We're back!

Hi everyone, starting today around 1:00 PM (13:00) GMT, we'll be temporarily offline for approximately five hours as I work on a major upgrade of the BLF site engine and underlying infrastructure. I'll provide updates here as time permits, or whenever I remember to pull my eyes out of my terminal window.  :-)  See you back soon! Thanks for your patience.

56 comments:

  1. Sweet, so when it's back up can we expect blackjack and hookers?

    ReplyDelete
  2. I don't know what I'm going to do!

    ReplyDelete
  3. I knew about the upgrade last night before bed but logged on to the site this morn and was disappointed I couldn't get on..that's how addicted to the Forum I am. LOL See yall later ! Streamer

    ReplyDelete
  4. Hi SB, Thanks for all the work you put into keeping the BLF light shining! Ron

    ReplyDelete
  5. BLF website says it will be back online at 1800 GMT. That's 1300 EST or 1pm.

    ReplyDelete
  6. Looks to be takin longer than expected...:O

    ReplyDelete
  7. Hopefully, it wasn't a typo ("GMT" instead of "EST").

    ReplyDelete
  8. I'm going nuts without BLF... What am I supposed to on my lunch break? "Help me Obi-Wan Sully, you're our only hope." - PD68

    ReplyDelete
  9. Soooo... Anybody wanna talk about flashlights? Please?

    ReplyDelete
  10. Sure do... can't wait to quiz pilotdog about that new triple!

    This made lunch suck today! :)

    ReplyDelete
  11. If anyone hasn't seen them yet: Acebeam K50v3 - http://www.hkequipment.net/product-p/k50v3.htm

    Acebeam K70 - http://www.acebeam.com/k70-cree-xhp35-3600lm-throw-1300m

    Seem to be the same in lumens and intensity. I'm not sure a price on the K70 but the K50v3 is 189.99 with 422Kcd intensity, pretty good! The only difference I see so far because the K70 specs are hard to come by right now is the design, possibly UI?

    ReplyDelete
  12. Maybe M4D M4X can get us a discount code on the K50v3. Not sure if I'd be interested though. Seems like the Nitecore TM16GT that I have is "good enough" for my purposes.

    ReplyDelete
    Replies
    1. I was a part of the group buy for the TM16GT, I do love the GT but I can't seem to get it to perform as well as others. Some can read 2.69 amps at the batteries but I can't get over 2.15 and I've tested with Sanyo GAs, Panasonic 18650bs, 30q's and Samsung 25r's all fully charged

      Delete
  13. This comment has been removed by the author.

    ReplyDelete
  14. Oh hummmmmmmmm....
    Insert: Jeopardy Music......

    ReplyDelete
  15. Oh hummmmmmmmm....
    Insert: Jeopardy Music......

    ReplyDelete
  16. Received my Kronos X5 & X6 boxed set yesterday, #35 of 400. Box made it through shipping okay. Flashlights were a bit dirty from the black felt (?). Gently washed them off with soap and water and toweled them dry with a soft cotton cloth. They came out gleaming! A few miniscule scuffs and scratches, but in tip-top shape overall!

    ReplyDelete
  17. Good deal on a Rayovac lantern... http://www.amazon.com/Rayovac-SE3DLNACOM-Sportsman-Lumen-Lantern/dp/B0018S4XIS

    ReplyDelete
  18. (sorry if the link looks spammy - just sharing something potentially relevant because I'm missing BLF too!)

    ReplyDelete
  19. (sorry if the link looks spammy - just sharing something potentially relevant because I'm missing BLF too!)

    ReplyDelete
  20. I thought this upgrade would be finished 7 hours AGO ! ????

    ReplyDelete
  21. I thought this upgrade would be finished 7 hours AGO ! ????

    ReplyDelete
  22. I'm sure SB must be pulling his hairs out.

    (Assuming he's not bald ;)

    ReplyDelete
  23. These things have a tendency to take longer, it will be done when it's done.
    SB thanks for all the work!
    I hope you get it all up and running without too much stress.
    Now without BLF no need for internet so what better excuse for switching off all the power and play with our torches ;)

    ReplyDelete
  24. Oh Dear! Its been Longer than 5 hours now! (Chewing on Fingernails) :P

    ReplyDelete
  25. As a fellow BLF'er, I'm also watching with baited breath. I feel that this fits quite well (as it does with many things!):

    Hofstadter's Law: It always takes longer than you expect, even when you take into account Hofstadter's Law.

    — Douglas Hofstadter, Gödel, Escher, Bach: An Eternal Golden Braid

    ReplyDelete
  26. I was actually on BLF when it went down. I saw the message and I'll admit... I sorta panicked a little. Lunch was weird. posting on a little blogshout while pretending it's BLF. lol Must sleep now so you have 7 hours or so SB before I freak. Heck of a compliment to the site you maintain though. Love BLF. J-Dub out...

    ReplyDelete
  27. Wait a second.... Is this another delayed groupbuy?

    ReplyDelete
  28. Curious that SB would start a thread for status updates, then doesn't post any updates. :P

    ReplyDelete
  29. I work in networking... please let him work... things must not be going well, when it works it works but will not happen any sooner.

    ReplyDelete
  30. I remember those long hours in front of a server trying to figure out why nothing is working after an update

    ReplyDelete
  31. Keep up the good work, sb! We can be patient... ;)

    ReplyDelete
  32. Keep up the good work, sb! We can be patient... ;)

    ReplyDelete
  33. What way is the threading on SUpfire M6 driver retaining ring? Clockwise to tighten?

    ReplyDelete
    Replies
    1. Have you figured out what size mcpcb needs to be used for the emitters?

      Delete
    2. Oh and I didn't have a chance to comment before the site went down but the light coming out of the metal tail switch on the blue S2+ Triple that you built is freaking awesome.

      Delete
    3. Other people have used 20mm mcpcb's, so that's what I'm banking on. I just can't get the stinking retaining ring to loosen up...

      Delete
  34. Does the Acebeam k50 v3 look like a good stock thrower for 189.99? I would like to see the k70 or k50v3 in a group buy soon! Although I don't know if you can purchase a k70 yet.

    ReplyDelete
  35. Sooo, bored that I took my XinTD C8 7135 driver out and threw a fet in.

    ReplyDelete
  36. For those interested in 17mm DD+1 driver development, here is the latest iteration on the A17DD-L. This version uses mostly 0603 sized passives and has a lot of stuff...

    http://photo.jesusthepirate.com/blf/17mm_DD+single-7135/v022/top.PNG

    * The new, proposed, Zener for 1s setup.
    * 0805 OTC + 0603 pulldown
    * 0603 bleeder for PD's tailcap LEDs
    * Pin 3 pad as requested by Tom E
    * Maintains 1mm physical keepout for components and 0.5mm non-GND keepout.
    * 2mm BAT+ passthrough

    Of course it's still looking a little rough, but DRC seems to be OK. (Yes, I'm aware that the 7135 needs to be attached to LED-)

    ReplyDelete
  37. Sounds like a nice update to a good driver.

    Sounds like I am going to have to get some 0605 stuff and some of the newer fets and I really need one or 2 attiny25's

    ReplyDelete
  38. Temporary link doesn't work any more.

    ReplyDelete
  39. I hope the site's back up and running soon. I'm getting withdrawal symptoms. ;)

    Best of luck to whoever is the admin of the server/website.

    ReplyDelete
  40. Make sure you spread a little peanut butter on each piece of bread, then put the jam in the middle. That way your sandwich won't get soggy

    ReplyDelete
    Replies
    1. Can peanut butter also stick an led to a sink pad?

      Delete
  41. Yes I want 75% off

    https://shadowhawkflashlights.com/ss1/video.php

    ReplyDelete